Autoleveller is a program used to aid in the process of milling printed circuit boards by probing the surface height of the pcb and using the probe data to create a height map. which is then used to modify gcode to take account of height variations. This allows very fine traces to be milled from the thin copper layer of pcbs. Continue reading
If your Brother HL-L8250CDN is giving you a “Replace Toner cartridge” message and refusing to print, then you can save some money and use the remaining toner in the cartridge by following this simple procedure to reset the toner cartridge. Continue reading
This a POV (Persistence of vision) Display based on an Arduino Pro Mini clone.