How to build a cheap cost effective diy power flusher with a submersible dirty water pump to power flush blocked central heating systems. Power flushing is used to clean scale, corrosion and magnetite from central heating systems, boilers and radiators. Boilers that cut out and make noises due to blockages caused by corrosion can often be cured by powerflushing.
Black and Decker Steam Mop Repair – No steam fault
This is how to repair a Black & Decker steam mop that is not producing any steam. The symptoms are that the steam mop is hot and makes a buzzing noise but no steam is produced. The fault is due to a small one way water valve in the body of the mop becoming stuck closed. The video show you how to dismantle the steam mop, remove the valve, repair the valve and then reassemble the steam mop.
High voltage electric shock circuit from a disposable camera
This is how to remove the high voltage camera flash pcb from a disposable camera. You can use this to revive nicad batteries, make sparks, electric shocks, mini taser, zap, zapper etc.
Warning – this circuit produces about 350 volts and could be dangerous in some circumstances.
Papercrete Rocket Stove Test
This was a test of a papercrete rocket stove. Papercrete is made with cement, sand, paper mulch and water and has greater insulating properties than concrete.
Taking down a shed
Leave a Reply
The opportunity to obtain some shed building materials presented itself this weekend, when my brother in law (in the photo above) decided to take down an old workshop in his garden. The downside of course being that I would have to help.
The workshop was apparently built by a wood turner and had some extensive ventilation pipework in the roof.
Finally it is down!
Installing Arduino Uno software on Windows and running your first sketch
Parts list:
US: http://amzn.to/1tiesWE
Uk: http://amzn.to/1UHQuNF
Paper Mache Rocket Stove
How to dismantle an Ikea Tertial lamp without cutting the wire cable
The Ikea Tertial lamp is a great product to use in your own projects, for example, microphone stands and overhead camera mounts. But you might want to save the cable and light fittings and so this video shows you how to remove them without cutting the cable.
HOW TO MAKE AN OVERHEAD CAMERA SWING ARM MOUNT
How to make an overhead camera swing arm mount using an Ikea Tertial lamp. This is a cheap an easy way of filming overhead product review and diy videos.