In this video I take a look at the Sainsmart Genmitsu 3018-mx3 mini cnc router designed for use with Mach3. Overview, build instructions and then testing with aluminium, acrylic and mdf.
Usbmach communicate error – when configuring homing in MACH3 version R3.043.062
This error occurred when using MACH3 version R3.043.062 but it did not occur when using using MACH3 version R3.041.
When using Version R3.043.062 the error occurs when you make a change in the homing configuration.
To configure homing in version R3.043.062
- Save the homing configuration
- Exit MACH3
- Run MACH3 again
Homing should now work.
Configuring Autoleveller to work with the Sainsmart Genmitsu 3018-mx3