When I Abort my Grbl Cnc the bit dives into the spoilboard and breaks.

Look for the cause

Enter $# in the console – this will print the current coordinate offset values for G54-G59 work coordinates, G28/G30 pre-defined positions, G92 coordinate offset etc.

Fix the problem

Enter $RST=# into the console – This erases and zeros all G54-G59 work coordinate offsets and G28/30 positions stored in EEPROM.

* Please let me know in the comments the results of $# and if $RST=# fixed the problem.

1 thought on “When I Abort my Grbl Cnc the bit dives into the spoilboard and breaks.

  1. Karl Riley

    I tried this fix. It worked once and then it went back to plunging into the work again. I retyped it and it didn’t work the second time. It still plunged into the work. The only thing I didn’t do was put a tool in so I didn’t break one this time.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.