Sainsmart Genmitsu PROVerXL 4030 Cnc Router

Sainsmart Genmitsu PROVerXL 4030 Cnc Router

Sainsmart PROVerXL 4030

Sainsmart Genmitsu PROVerXL 4030 GRBL configuration

GRBL V1.1 Configuration & Settings

21 thoughts on “Sainsmart Genmitsu PROVerXL 4030 Cnc Router

  1. Jordan Ludusan

    Hi, I’m considering to buy this machine. Do you think it is better than the 3018 cnc? Can it do a lot more, like big relief carvings and plaques? It seems really well made with big stepper motors and dual lead screws. Thanks

    Reply
    1. techydiy Post author

      Yes it is much better than a 3018, not even comparable really.
      Yes it can do big relief carvings and plaques. It comes with a 3 month trial of carveco which is really good for that type of work.
      I highly recommend the 4030XL, its a great bit of kit.

      Reply
    1. techydiy Post author

      It has a a laser connection port, so yes you can, but they haven’t released a laser kit yet, so you would have to design the mount etc. yourself.

      Reply
  2. Adegboyega Kokumo

    Good day sir
    How are you doing and your business
    I am very much interested in your products especially 3040 computer engraving machine.
    Give me the price and how it can shipped to me in Nigeria.
    Thanks
    Adegboyega Kokumo

    Reply
    1. techydiy Post author

      The PROVerXl gives you a bigger work area, more powerful spindle motor and more powerful stepper motors.
      Is it better than the 3018 PROVer for milling pcbs? Only if you need bigger pcbs.
      The 3018 PROVer is fine for making pcbs. If you are not getting good results, then that is a different issue.

      Reply
  3. Beat Waldschmidt

    can the machine work with e Mac-System ?
    I work now with the 3018 Genmitsu and a windows Laptop …
    Sorry my English. I’m from Switzerland.

    Reply
  4. Jos

    Hi,

    I’m currently using the 3018 PROVer and works fine, only the play on the router bit (due to the construction and design of the machine) is too much. Is this better with the 3040 PROVerXL?
    How does the guiding with teh plastic wheels work?

    Thanks for your feedback.
    Jos

    Reply
    1. techydiy Post author

      The PROVer XL 4030 is a significantly more robust machine. It is not in the same category of machine at all.
      The wheels work fine, unless you want to mill aluminium everyday they should be fine.

      Reply
  5. Libbi

    I’m thinking a lot this for my husband.
    I’m curious about the working area.
    I know it can only handle a certain width and thickness.. but in theory, could one engrave an area and then slide a board a little more to the side to engrave next to it? Obviously images would be tricky… but perhaps a long sign?

    Reply
    1. techydiy Post author

      You can’t use Mach3 with the the PROVer XL (you would use a free GRBL gcode sender like candle. UGS or Openbuilds instead)
      Yes you can use V-Carve Pro – just select a grbl post processor

      Reply
  6. Dylan shandley

    How difficult do you think it would be to change the sets of rubber wheels for linear rails, and the X and Y axis’ to ballscrews?

    Reply

Leave a Reply to Libbi Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.